Using the Simplicity Wheelchair Lift Ramp - the Wheelchair ramp that lifts to Enter Building (See Video)
- Person rolls onto Lift Ramp while it is in the down position.
- Position the wheelchair on the "loading area" of the Lift Ramp.
- Lock the brakes of the wheelchair. For user's safety, brakes must be locked before activating the Lift Ramp.
- Press the pushbutton located on the control arm to raise the Lift Ramp which also raises the stop-plate.
- When the pushbutton is initially activated, the Lift Ramp stop-plate is raised preventing the wheelchair from rolling off the end of the platform.
- The Lift Ramp rises to the predetermined floor level for easy access to the building. The Lift is now parallel to the floor.
- Person unlocks the brakes of the wheelchair and rolls into the building.
- Person actuates the remote control and returns the Lift Ramp to the down position.
- When the Lift Ramp lowers and is fully in the down position, the Lift Ramp stop-plate will lower by gravity.
- The Lift Ramp is ready for the next operation. (Lift Ramp operates on a power lift "up" and gravity "down" principle.
Using the Simplicity Wheelchair Lift Ramp - the wheelchair ramp that lifts to Exit Building (See Video)
- Use the remote control to raise the Lift Ramp platform to up position. Lift Ramp should be parallel to floor.
- Person rolls onto Lift Ramp and positions wheelchair in "loading area" on platform.
- Person locks the brakes of the wheelchair. For user's safety, brakes must be locked before activating the Lift Ramp.
- Person actuates Lift Ramp control pushbutton to lower Lift Ramp.
- Lift Ramp then lowers to full down position by gravity to allow smooth exit from Lift Ramp.
- Person unlocks wheelchair brakes and exits the Lift Ramp.
- Person leaves Lift Ramp in full down position, ready for next operation.