|
The Simplicity
Wheelchair Lift Ramp - the wheelchair ramp that lifts is designed to fit
existing steps, porches or stoops without modification. It is only 8
feet long, operates with a standard 115 volt A.C. outlet and weighs 450
lbs. The construction is heavy-duty structural steel and
fully-welded steel tubing. The Simplicity
Wheelchair Lift Ramp has a lifting
capacity of 500 lbs. A single activation button is located on the
arm at the bottom of the ramp, and a second button in the remote control
unit that is supplied with each Simplicity
Wheelchair Lift Ramp.
Safety features have been extensively researched during the development of
the Simplicity
Wheelchair Lift Ramp - the wheelchair ramp that lifts which will assure the safe operation to all who
use one. Stop plates at the end of the ramp are instantly activated
when the control button is pressed. When the wheelchair ramp is elevated, the
space exposed underneath is covered by an end guard. Should any
movement be detected by the photo-electric eye cells on the legs of the
Lift Ramp, motion is immediately halted, thus preventing any mishaps
should objects or pets move under the lift. Solid side guards add
total assurance to the user.
The Simplicity
Wheelchair Lift Ramp can be installed with various options: higher
lift capacity, 90° platform, handrails, weather canopy, bridge plates and
many more.
There are approximately 70% fewer parts in the Simplicity
Wheelchair Lift Ramp
compared to vertical lifts. The more moving parts, the higher the
probability of failure. The only component subject to loss or damage
is the remote control. A standard electronic system was selected.
The transmitter and receiver can be purchased at your local hardware
store. A removable dolly wheel system was designed to facilitate
mobility. The unit can be moved to alternate locations and plugged
into any standard household electrical outlet. The remote can be
easily attached to the wall in the entry way.
The installation of the Simplicity
Wheelchair Lift Ramp is completed with little
effort. The wheelchair ramp height is factory set allowing the installer to
push the ramp into place, plug in, and use immediately. No
foundation or electrical wiring work is required. A dolly system
option is also available for rolling the ramp into position effortlessly.
|
